Enforcement Register Index

Either -

• remove the roller shutter and shutter box and reinstate the aluminium single light fitted window within the reveal
• reposition the roller shutter and shutter box within the reveal in the same manner as those on the Lowgate elevation of the premises

1. Render the walls of the new extension as per the approved plans
2. Fit obscure glazing in the first-floor window in the north-west elevation of the main dwelling

1. Reduce the height of the fence to no more than 2 metres
2. Paint the fence in a neutral colour (black or dark green)

1. Demolish and remove from the site the concrete column enclosed by the scaffolding
2. Remove all scaffolding, timber boards, ladders and any other items attached to or located on the scaffolding

1. Remove the decking
2. Either remove the railings or reduce the height of the railings so that no part of their structure is over 1 metre in height from ground level

1. Demolish all the buildings within the red line on the plan attached to the notice, ensuring any walls, roofs and openings exposed as a result of the demolition are shored up and/or rebuilt and weatherproofed
2. Level the site and clear all debris and overgrown vegetation following demolition
3. Erect 2m high close boarded fencing to all exposed boundaries following demolition. The fencing should be painted or stained a dark colour

1. Remove the unauthorised door with the side panel
2. Remove the concrete steps
3. Replace the door with a side panel and the concrete steps with a window to match that on the previous frontage. All brickwork beneath the window shall be made good and finished in the same materials and colour

1. Remove the air conditioning unit and all associated wires and paperwork
2. Return the western elevation wall to its former appearance by making good any damage or changes resulting from this unauthorised development or its removal

Submit to the Local Planning Authority a sound attenuation scheme for the premises, between the ground floor residential accommodation and first floor restaurant and between the restaurant and second floor residential accommodation, for consideration by the Local Planning Authority.

And ceasing the following activity -

The playing of all amplified music - for the avoidance of doubt, this includes all music played through a sound system and speakers at any level.

1. Paint the existing boards on the ground floor front elevation black
2. Cover existing exposed brickwork on the ground floor front elevation with timber boards and paint black
3. Install timber boards on all first and second-floor window reveals and paint them black
4. Repaint the fall pipe on the front elevation black, or replace it with a new black fall pipe of the same material
5. Repair fascia on the roof eaves and install new gutter blocks
6. Repair brickwork adjacent to the fascia
7. Remove all vegetation from the gutters at the front
8. Replace missing roof tiles on the front roof slope with matching roof tiles

Ensure that all deliveries are received and dispatched within the times identified in Condition 14 of Planning Approval 00004464Z

And ceasing the following activities -

The receipt or dispatch of any deliveries outside the times identified in Condition 14 of Planning Approval 00004464Z

1. Remove all motor vehicles from the land
2. Cease the use of the land for the storage of motor vehicles

1. Remove felt from the top of the ground floor front bay window and replace it with lead as shown on photographs attached to the notice
2. Remove felt from the door pediment and replace it with lead as shown on photograph attached to the notice

1. Dismantle the shelter attached to the approved two-storey extension
2. Remove the waste material from the premises

1. Cutback all overgrown vegetation on the land
2. Remove all cuttings and general rubbish from the land

1. Complete the programme for the wearing course of the estate road and footpath as set out in the approved plan
2. Replace the section of the removed boundary fence with a chain link fence erected to a height of 1.85 metres

1. Remove the 2 first-floor front mock sash windows and replace them with 2 x 6-over-6 genuine (not mock) vertical sliding (not outward opening) box sash windows (50/50 split) with externally mounted glazing bars, but no horns or trickle vents, all set back behind the masonry
2. Remove the first-floor mock sash window in the side elevation and replace it with a 6-over2 genuine (not mock) vertical sliding (not outward opening) box sash window (50/50 split) with externally mounted glazing bars, but not horns or trickle vents, all set back within the masonry
3. Remove the first-floor front mock sash windows and replace them with 2 x 6-over-6 genuine (not mock) vertical sliding (not outward opening) box sash windows (50/50 split) with externally mounted glazing bars, but no horns or trickle vents, all set back behind the masonry
4. Remove the 8 x 4-light sashes from the ground floor canted bay windows and replace with 8 x 5- light fixed (non-opening) sashes with Tudor arch top rails and externally mounted glazing bars, but no trickle vents

1. Remove the replacement windows on the first and second floors of the front elevation
2. Either -
   1. install windows to exactly match the style, design and proportions of the previous windows
   2. install 2 over 2 vertical sliding sash windows with horns