| 44 Beverley Road |
5 January 2016 |
- Remove the 2 first-floor front mock sash windows and replace them with 2 x 6-over-6 genuine (not mock) vertical sliding (not outward opening) box sash windows (50/50 split) with externally mounted glazing bars, but no horns or trickle vents, all set back behind the masonry
- Remove the first-floor mock sash window in the side elevation and replace it with a 6-over2 genuine (not mock) vertical sliding (not outward opening) box sash window (50/50 split) with externally mounted glazing bars, but not horns or trickle vents, all set back within the masonry
- Remove the first-floor front mock sash windows and replace them with 2 x 6-over-6 genuine (not mock) vertical sliding (not outward opening) box sash windows (50/50 split) with externally mounted glazing bars, but no horns or trickle vents, all set back behind the masonry
- Remove the 8 x 4-light sashes from the ground floor canted bay windows and replace with 8 x 5-light fixed (non-opening) sashes with Tudor arch top rails and externally mounted glazing bars, but no trickle vents
|
| 210 to 212 Spring Bank |
7 January 2016 |
Remove the brown tiles from the ground floor of the Hessle Road elevation and restore the shop front to its former appearance. |
| 1044 Anlaby Road |
7 January 2016 |
- Submit to the Local Planning Authority for approved details of a sound attenuation scheme for the premises.
- Submit to the Local Planning Authority for approval details of equipment to control the emission of fumes, including the location and design of any external pipe or flue.
|
| 1, 2 and 3 Shaw Street and 25 to 32 (even) Holderness Road |
8 February 2016 |
- Thomas Street elevation - Remove the shop window below the multi-paned overlight situated to the south east of the doorway with segmental pediment (which displays No 32) and reinstate double doors in timber, each with 3 over 3 top lights as shown in the photo attached to the notice
- 1 Shaw Street - Remove the new uPVC door and overlight and reinstate a timber door and overlight to match the design and detailing shown in the photo attached to the notice
- 1 Shaw Street - Remove 2 new ground floor uPVC windows to the north of the doorway and replace with 2 genuine (not mock) vertical sliding (not outward opening) 4-over4 timber box sash windows (configured (split) 50/50) with horns, flush outer frames, externally mounted or solid glazing bars and no trickle vents as shown on the photo attached to the notice
- 3 Shaw Street - Remove the new uPVC door and replace it with a timber door to match the design and detailing of that shown in the photo attached to the notice
|
| 101 Spring Bank |
9 February 2016 |
- Remove the new front door and reinstate a panelled front doorcase to match those shown in the photos attached to the notice.
- Remove the new windows and reinstate windows to match the previous windows, including positioning in reveals with the garret window as a 1-by1 flush frame sash, the two first-floor windows as 2 over 1 flush frame sashes, the ground-floor bay windows with a large central light with two lying panes in the central section.
- The sashes of the bay window shall have large single lights with two small rectangular lights in the top sections.
- Transoms and mullions should be of slim proportions.
- The basement windows shall have three large single lights.
- None of the aforementioned windows must feature projecting storm-proof sashes or trickle vents.
- All the aforesaid windows shall be installed so as to match the proportions and configurations.
|
| 1 to 2 Dock Office Row |
14 March 2016 |
- Replace the five uPVC windows on the south-facing elevation with timber sliding sash windows which match the previous windows on the south elevation
- Alter the ground floor windows in the front (west) elevation to increase the width of the window openings to the same size as those on first floor windows and install timber sliding sash windows.
|
| 550 Holderness Road |
3 June 2016 |
- Reduce the height of railings to no more than 1 metre in height from ground level
- Remove the shop front
- Install a replacement shop front which matches the design and proportions of the previous shop front
|
| 220 Beverley Road |
9 August 2016 |
- Remove the ATM and composite panel
- Reinstate the shop front in design and materials to match the remaining elements of the shop front
|
| 94 Spring Bank |
9 August 2016 |
- Remove the ATM and composite panel
- Reinstate the shop front in design and materials to match the remaining elements of the shop front
|
| 15 Bowlalley Lane |
22 August 2016 |
- Remove the front door case.
- Make good and repair to the previous condition any damage caused to the building by the installation or removal of the front door case
|
| 120 Holderness Road |
9 September 2016 |
- Remove the unauthorised windows on the first and second floors of the front (Holderness Road) elevation of the premises
- Replace the unauthorised windows with 4 x 1-over2 genuine (not mock) vertical sliding (not outward opening) sash windows with horns, cambered arch top rails and no trickle vents (split configured 50/50) and set back in the reveal behind the masonry
|
