Enforcement Register Index

1. Remove the extension to the front of the premises at the ground floor level
2. Remove the timber cladding installed below the main fascia and to the pilasters of the shop front

• Either - Reinstate the ground floor frontage to how it appeared prior to the development (except for the ‘busy bodies’ sign)
• Or - Amend the ground floor frontage to match that shown on the approved plan.

• Either - Reinstate the first-floor cross windows and second-floor attic cross windows to match the design, style and detailing
• Or - replace or amend the currently installed first and second floor windows to achieve ‘like for like’ replacements.

1. Remove the extension to the front of the premises at the ground floor level
2. Remove the timber cladding installed below the main fascia and to the pilasters of the shop front

1. Remove the brass window sill, exposing the wooden sill below
2. Repair any damage inflicted on the wooden sill by the installation or removal of the brass sill. If repairs are not feasible, replace the wooden sill with a ‘like-for-like’ wooden sill in terms of style, design and colour.

• Either - Adapt the hard surface created so that surface run off water is directed to a permeable or porous area to drain away within the curtilage of the premises
• Or - Reduce the surface area of the hard surface created to no more than 5 square metres

Remove the wire mesh fence erected as a means of enclosure to the front of the premises adjacent to the public highway.

1. Cease the repair of motor vehicles (cars, vans, motorcycles, etc.) which are not registered to those registered at the dwelling house
2. Cease the repair of any watercrafts (boats, jet skis, etc) which do not belong to those registered at the dwelling house
3. Cease the repair, maintenance, and storage of engines or engine parts which are not a part/component of the vehicles described in parts 1 and 2
4. Cease customers/clients/members of the public visiting the address to drop off, purchase, pick up or work on any motor vehicles, watercrafts, engines, engine parts, or similar items

1. Remove the pipework on the East elevation and make good any damage
2. Remove the wall-mounted air conditioning units and make good any damage
3. Remove the satellite dish from the rear of the building and make good any damage

• Either - Reinstate the ground floor frontage to how it appeared prior to the development (as shown in the photograph).
• Or - Amend the ground floor frontage to match that shown on approved plan BUS/01/18/B or later plan BUS/01/18C, attached to the notice

• Either - Reinstate the first-floor cross windows and second-floor attic cross windows to match the design, style and detailing as shown on photographs
• Or - Replace or amend the currently installed first and second floor windows to achieve ‘like for like' replacements as shown in the photographs